ApBUILDER Software

The installation programs shown below contain the entire ApBUILDER software supporting the following microprocessors and microcontrollers:

8XC251SA, 8XC251SB, 8XC251SP, 8XC251SQ,
8XC52, 8XC54, 8XC58, 8XC51FA, 8XC51FB, 8XC51FC,
80C186EA, 80C188EA, 80C186EB, 80C188EB, 80C186EC, 80C188EC,
8XC198, 8XC196KD, 8XC196KC, 8XC196KB,
8XC196KR, 8XC196KQ, 8XC196KT, 8XC196JR,
8XC196JQ, 8XC196JT, 8XC196NT, 8XC196NP, 8XC196NU,
8XC151SA, 8XC151SB,
82930AX, 82930HX,
Intel386(TM) EX

System Requirements
The following system requirements are the minimum required to run ApBUILDER.

Windows(TM) 3.1 or above
486 PC or above
VGA monitor
3-7 MB hard disk space
8 MB RAM memory

Download Hypertext Manuals
Download Hypertext Data Sheets
Return to ApBUILDER Description

Download this program to install ApBUILDER directly from you hard drive. This program is too big to copy directly to floppy diskettes. To create floppy installation diskettes use the APBDISK1.EXE, APBDISK2.EXE and APBDISK3.EXE files below.

APBLD221.ZIP
3,658KBytes

Description: Complete ApBUILDER software for installation from your hard drive.
Installation: To install ApBUILDER, unzip APBLD221.ZIP; then run setup.exe from Windows.
Latest Version: v2.21

Download these files to create ApBUILDER installation diskettes.

APBDISK1.ZIP
1,406KBytes

APBDISK2.ZIP
1,436KBytes

APBDISK3.ZIP
816KBytes

Description: Complete ApBUILDER software for installation from 3.5" high-density floppy diskettes.
Installation: First, create your installation diskettes by unziping file APBDISK1.ZIP and copying the resulting files to a 3.5" high-density diskette. Repeat the process for APBDISK2.ZIP and APBDISK3.ZIP. You can now install ApBUILDER on any suitable machine using these diskettes. To install ApBUILDER, insert disk 1 and run SETUP.EXE from Windows.
Latest Version: v2.21